MATCH PP 86DSP MK2

  • M118003
  • DE 29323089

Technologies

Amplifier Class

Class HD Feature

Inputs

Highlevel Input Feature Optical Input Feature MEC Slot Feature Smart Control Port Feature ADEP 3 Feature

DSP-Features

Advanced Co Processor Feature 64 Bit DSP Feature Input Signal Analyzer Feature Input Equalizer Feature Automatic Time Measurement Feature Virtual Channel Processing Feature 1 to 1 In Out Routing Feature SFX DSP Sound Effects Feature

Hardware Technologies

Regulated Power Supply Feature Surface Mounted Device Auto Remote Switch Feature

Additional Features

 

Plug and Play Feature Plug and Play Subwoofer Ready Feature DSP PC Tool Ready Feature Audiotec Fischer-Start Stop Capability Feature Power Safe Mode Feature Remote Control Ready Feature Made in Germany Feature

MATCH PP 86DSP MK2

Plug & Play Power for Multi-Channel Factory Sound Systems

The MATCH PP 86DSP MK2 seamlessly continues the successful story of its predecessor while implementing several upgrades. As a high-performance 8-channel amplifier with a 1-channel line output and an integrated 9-channel DSP with 64 Bit power, it’s perfectly suited for audiophile upgrades of multi-channel factory sound systems, conveniently providing an impressive sound experience.

Seamless Integration and Impressive Connectivity

The MATCH Plug & Play concept ensures seamless integration with factory systems, which was uncompromisingly realized in the PP 86DSP MK2. With its impressive 2 Ohms stability across all amplifier channels, it effortlessly connects to nearly all OE speakers, while optional cable harnesses significantly facilitate integration into existing multi-channel factory sound systems. Furthermore, the MATCH PP 86DSP MK2 boasts enhanced connectivity, featuring an intelligent 6-channel highlevel input with the ADEP.3 circuit and a MEC slot for system expansions such as Bluetooth® HD audio streaming. It also includes a 1-channel mono line output for connecting external amplifiers like the MATCH UP 1FX and an optical input in SPDIF format with a sampling rate between 12 and 96 kHz. Last but not least, it also comes with our SCP port for optional accessories like the DIRECTOR, CONDUCTOR etc.

Virtual Channel Processing – The Modern Way of Signal Routing

The optimal adaptation to existing multi-channel sound systems requires sensible management and configuration of the many DSP channels – so it was no question that the PP 86DSP MK2 is also equipped with Audiotec Fischer's innovative virtual channel processing. Especially when front, rear and center systems are split into multi-way systems, conventional routing concepts quickly reach their limits, both in terms of implementation and usability.

The multi-stage "Virtual Channel Processing", in conjunction with the recognized user-friendly DSP PC-Tool software makes it easy to map even highly complex system configurations and to freely assign our proprietary FX sound features. Additionally, thanks to its generous number of channels in combination with the optional MEC ANALOG IN module, the PP 86DSP MK2 is also a prime example for applications where 1 to 1 routing (IOR) makes sense.

ACO – Advanced 32 Bit CoProcessor Plattform

Of course, the PP 86DSP MK2 is equipped with our proprietary 32 Bit ACO platform, which doesn’t just take over all control tasks ultra-fast, but also handles a bunch of audio functions: fantastic sound effects such as Augmented Bass Processing or Real Center are implemented as well as a channel-separated Input EQ including Input Signal Analyzer (ISA) for easy analysis and compensation of input signals of OE radios, which already include a sound setup by default.

DSP PC-Tool 5 feat. TuneEQ – Powerful features for the ultimate sound experience

Of course, the MATCH PP 86DSP MK2 can be easily configured via our professional and exceptionally intuitive DSP PC-Tool. The familiar, numerous setting options leave nothing to be desired and guarantee an extremely precise sound adjustment even for complex system configurations. And thanks to the proprietary TuneEQ function for automated frequency response correction, you also save a lot of time when optimizing your sound.

Features

  • High-performance 8-channel amplifier with 1-channel line output and integrated 9-channel DSP
  • Perfect for upgrading multi-channel factory sound systems
  • 2 and 4 Ohms stability on all amplifier channels – effortless connection to almost every OE speaker
  • Optional cable harnesses for easy integration into existing multi-channel factory sound systems
  • Extremely powerful 64 Bit “fixed point” Audio DSP
  • ACO – Advanced 32 Bit CoProcessor platform for extended feature set
    • ISA (Input Signal Analyzer) and InputEQ for easy analysis and compensation of input signals
    • Proprietary TuneEQ function for automated adjustment of the output equalizers
    • SFX (DSP Sound Effects) – Augmented Bass Processing, RealCenter & Co.
  • Smart 6-channel highlevel input with ADEP.3 circuit and adjustable input sensitivity from 5 to 11 Volts
  • VCP (Virtual Channel Processing) allows even more flexible configuration for highly complex sound systems
  • MEC slot for system expansions like Bluetooth® HD Audio Streaming, High Resolution Audio Streaming via USB etc.
  • Optical input in SPDIF format with sampling rate between 12 and 96 kHz
  • 1-channel line output for the connection of external amplifiers e.g. subwoofer amplifier MATCH UP 1FX
  • SCP (Smart Control Port) for optional accessory like DIRECTOR, CONDUCTOR & Co.
  • Start-Stop capable power supply with extended input voltage range up to 18 V – ideal for modern EV vehicles
  • Auto Remote switch
  • 1:1 IOR (Input-to-Output Routing) in combination with the optional MEC ANALOG IN module – same number of highlevel inputs and amplifier outputs
  • Compact design with low heat dissipation thanks to extraordinary efficiency

 

Special features:

Class HD technology

The PP 86DSP MK2 combines the advantages of a Class H technology with the principle of a class D amplifier. The result is an unsurpassed efficiency which easily outperforms any conventional Class D amplifier. By varying the internal supply voltage depending on the amplifier’s amplitude of the input signals, idle losses are significantly reduced and overall efficiency is close to maximum at any time.

ACO – Advanced 32 Bit CoProcessor

The PP 86DSP MK2 incorporates an extraordinary powerful 32 Bit CoProcessor of the latest generation. This not only takes over all control tasks ultra-fast, but also the lightning-fast switching between up to ten possible sound setups. 
But ACO offers much more – besides a channel-separated Input EQ including Input Signal Analyzer (ISA) for easy analysis and compensation of input signals of OE radios and fantastic sound effects like Augmented Bass Processing or RealCenter, there is now the revolutionary TuneEQ function for automated adjustment of the output equalizers.
A further significant advantage is the integrated, native boot loader of the CoProcessor. It allows software upgrades of all components of the DSP in order to adjust the microcontroller-controlled ADEP.3 circuit for example at future modifications / changes in the diagnostic system of factory radios or if the device will be extended with additional interfaces.

Smart highlevel input ADEP.3

Modern, factory-installed car radios incorporate sophisticated possibilities of diagnosing the connected speakers. In particular the latest generation of car radios are equipped with additional monitoring functions so that failure messages and loss of specific features (e.g. fader function) quite often appear if a common amplifier will be hooked up – but not with the PP 86DSP MK2.
The new ADEP.3 circuit (Advanced Diagnostics Error Protection, 3rd Generation) avoids all these problems without loading the speaker outputs of the OE radio during high volumes unnecessarily.

Start-Stop capability

The switched power supply of the MATCH PP 86DSP MK2 assures a constant internal supply voltage even if the battery’s voltage drops to 6 Volts during engine crank. If the supply voltage drops below 10.5 Volts for more than five seconds the amplifier goes to “Protect mode” (Status LED lights up red) in order to avoid any further discharge of the car’s battery.

Automatic Digital Signal Detection

The PP 86DSP MK2 allows signal-controlled switching between the analog inputs and the digital input. As soon as an input signal is detected on the optical input, the amplifier automatically switches to this input. This feature can be deactivated in the DSP PC-Tool software. Alternatively you can use an optional remote control for manual switching between analog and digital inputs.

Power Save Mode

The Power Save Mode is incorporated in the basic setup. It allows to significantly reduce the power consumption of the PP 86DSP MK2 and potentially connected amplifiers once there’s no input signal present for more than 60 seconds. Please note that in many up-to-date cars with “CAN” or any other internal bus structures it may happen that the radio remains “invisibly” turned on for up to 45 min. even after locking and leaving the car! Once the “Power Save Mode“ is active the remote output and therefore the connected amplifiers will be turned off. The MATCH PP 86DSP will reactivate the remote output within a second if a music signal is applied. It is possible to either modify the turn-off time of 60 sec. or completely deactivate the “Power Save Mode” via the DSP PC-Tool software.

Note: “The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Audiotec Fischer GmbH is under license. Other trademarks and trade names are those of their respective owners.”

DSP features

TuneEQ

TuneEQ is an extremely flexible and particularly easy-to-use function for automated frequency response correction. A single measurement per audio channel or channel pair with a suitable measurement microphone (e.g. our MTK1) is sufficient for TuneEQ to independently and precisely adjust the equalizers to the desired reference curve. TuneEQ uses the full function set of the parametric equalizer including center frequency, Q-factor and gain adjustment. And since the highly complex arithmetic operations required for this run in the background, you also save a lot of time when optimizing your sound with TuneEQ.

RealCenter

The “RealCenter” feature is an algorithm, developed by Audiotec Fischer, that emphasizes the music information which is present in both the left and right front channel to create an unique center signal. In contrast to common procedures, in which only the channels are summed up, the intensity of the center signal is also dynamically controlled by the stereophonic informational content of the left and right channel.

Sounds complicated but this effect is astonishing: That means if solely the left or right channel delivers an audio signal, the center channel will not reproduce a signal. In the case of common algorithms, the volume level of the center channel is only reduced by 6 dB (= half volume level). Audiotec Fischer’s “RealCenter” allows a unique, broadened sound staging for both driver and co-driver at the same time! Therefore, the disadvantages of a conventional center channel, such as an intrusive, small sound stage, are things of the past.

Augmented Bass Processing

Audiotec Fischer’s proprietary “Augmented Bass Processing”, consisting of the two revolutionary sound features “Dynamic Bass Enhancement” and “SubXpander”, has been especially developed to dramatically improve the bass reproduction of subwoofers.

The “Dynamic Bass Enhancement” ingeniously combines maximum deep bass and highest sound pressure – regardless of the music style or the tone controls in the head unit. Depending on the input signal, the “Dynamic Bass Enhancement” gains the lower frequency range and varies the cut-off frequency of the subsonic filter. The result is a significantly more powerful and deeper bass response at low and medium volume levels without the risk of overloading the subwoofer neither mechanically nor electrically at high volume levels. It is simply fascinating which bass performance is suddenly possible.

If you want an even lower and “darker” bass reproduction, the “SubXpander” can be additionally activated. Therefore, subharmonic tones are added to the fundamental tones in the frequency range between 50 and 100 Hz.

Technical data

Output power RMS  
- @ 4 Ohms 8 x 55 Watts
- @ 2 Ohms 8 x 70 Watts
- @ 1 Ohm
- bridged @ 4 Ohms
- bridged @ 2 Ohms
- Subwoofer output @ 4 Ohms
- Subwoofer output @ 2 Ohms
Amplifier technology Class HD
Inputs 6 x Highlevel speaker input
1 x Optical SPDIF (12 - 96 kHz)
1 x MEC
1 x Remote In
Input sensitivity Highlevel 5 - 11 Volts
Input impedance RCA / Cinch
Input impedance highlevel 9 - 33 Ohms with ADEP.3
Outputs 8 x Speaker output
2 x RCA / Cinch (mono)
2 x Remote Out
Output voltage RCA / Cinch 3 Volts RMS
Frequency response 20 Hz - 22,000 Hz
DSP resolution 64 Bit
DSP power 295 MHz (1.2 billion MAC operations/second)
Sampling rate 48 kHz
DSP type Audio signal processor
Signal converters A/D: BurrBrown
D/A: BurrBrown
Signal-to-noise ratio digital input 105 dB (A-weighted)
Signal-to-noise ratio analog input 103 dB (A-weighted)
Distortion (THD) < 0.015 %
Damping factor > 100
Operating voltage 10.5 - 18 Volts (max. 5 sec.down to 6 Volts)
Power rating DC 12 V ⎓ 40 A max.
Idle current 685 mA
Max. remote output current 500 mA
Operating temperature range -40° C to +70° C
Fuse 2 x 25 A LP-Mini-fuse (APS)
Additional features Class HD technology with dynamically controlled
power supply, 32 Bit CoProcessor, ADEP.3 circuit, Smart Control Port, Start-Stop capability, USB, MEC slot, Auto Remote switch, galvanically isolated Line Outs
Dimensions (H x W x D) 44 x 185 x 164 mm /
1.73 x 7.28 x 6.46“

Scope of delivery

1 x Amplifier MATCH PP 86DSP MK2
3 x Connection cable
1 x USB cable
1 x Mounting material
1 x Instruction manual

Knowledge Base
Visit Knowledge Base
Product questions?
To the form
Distributors
Find a distributor