HELIX C 2M
These reference speakers in our C-series raise the bar to a new level of fantastic sound quality. The legendary sisal woofer cones are equipped with an additional structural damping layer made of an elastomer, which again improves the acoustic properties of the driver. The tweeter enclosure also underwent a complete overhaul. Anyone who wants to operate these loudspeakers as fully active speakers (e.g. using our new digital signal processors) can put together the system of their choice by combining the individual components.
Features
- Ultra lightweight silk dome for a distinguished and natural midrange response
- Sturdy protection grille for protecting the dome from damages
- 10 x drilled neodymium magnet for highest magnetic flux linearity
- Integrated, dampened coupling volume for very low resonance frequency
Technical data
Power RMS / max. | P | 40 / 80 Watts (highpass > XX00 Hz at 12 dB/Oct.) |
Impedance | Z | 4 Ω |
DC resistance | Re | 3.4 Ω |
Resonance frequency | Fs | 460 Hz |
Efficiency 1 W / 1 m | SPL | 93 dB |
Voice coil diameter | ø | 50 mm |
Cone area | Sd | 20 cm² |
Moving mass | Mms | 1.6 g |
Cone material | Silk dome | |
Outer diameter | ø | 90 mm / 3.54" |
Installation diameter | ø | 78 mm / 3.07" |
Installation depth | 31.15 mm / 1.23" | |
Recommended crossover frequencies for the highpass | ||
Slope | Minimum crossover frequency | |
6 dB/Octave | 1,250 Hz | |
12 dB/Octave | > 750 Hz | |
24 dB/Octave | > 650 Hz |
Scope of delivery
2 x High-end midrange speaker HELIX C 2M
2 x Fitting spring
2 x Allen screw
1 x Allen key