HELIX IK W6

Version:

  • K330600
  • DE 29323089

Press & awards

2022-05-Car-Hifi-Button-HELIX-IK-W6-DVC2-Best-Product

2022-05-Car-Hifi-Bewertung-HELIX-IK-W6-DVC2

HELIX IK W6

Rich bass out of compact dimensions

The chassis of the K subwoofer series can all be used in very compact enclosures in which they perform magnificently with exceptional bass performance. Especially when it comes to using the available space in the vehicle as good as possible due to an individual enclosure design, these woofers open up completely new possibilities for installation without making any acoustic compromises.

Clever down to the last detail

The extremely stiff cone made of hand-scooped paper fibers in connection with the heavy-duty driver system not only converts amplifier power easily and without compression effects into loads of sound pressure, but also scores sonically with subtle beats.

Flexible connection

Designed as a 1 x 2 Ohms (SVC2) or 2 x 2 Ohms (DVC2) variant, you can find the right low bass specialist for any amplifier configuration to get the maximum performance out of it.

"All inclusive" for the do-it-yourselfer

In addition, the solid protective grille and gasket are also included.
For optimal bass performance in DIY installations you can find recommendations for sealed and vented enclosures with all parameters such as net volume, port tuning frequency as well as DSP settings in our technical data sheet.

Features

  • 1 x 2 Ohms single voice coil
  • Powerful magnet system for compact vented enclosures
  • Extremely stiff, hand-scooped paper cone
  • Double ventilated voice coil for minimum compression effects and high power handling
  • Long-excursion rubber surround for highest mechanical rating
  • Gold-plated terminals for maximum conductivity
  • Rugged magnet cover with HELIX lettering for perfect magnet protection
  • Grille and gasket included in delivery

Technical data

    IK W6-DVC2 – 2 x 2 Ohms
Power handling RMS / Max. P 150 / 300 Watt
Impedance Z 2 x 2 Ω
DC resistance  Re 2 x 2.0 Ω
Resonance frequency  Fs 50 Hz
Mechanical Q factor Qms 3.92
Electrical Q factor  Qes 0.32
Total Q factor  Qts 0.30
Compliance Cms 261 μm/N
Equivalent air volume  Vas 5.3 L
Force factor   B*I 12.3 Tm
Sensitivity SPL 89.0 dB @ 2.83V / 1m
86.0 dB @ 1W / 1m
Cone area  Sd 123 cm²
Moving mass  Mms 37 g
Cone material   Hand-scooped paper cone
Mechanical resistance  Rms 3.04 kg/s
Voice coil diameter ø 37 mm
Voice coil winding height   18 mm
Max. linear excursion  Xmax +/- 6.0 mm
Outer diameter ø 164.2 mm / 6.46"
Installation diameter ø 132.5 mm / 5.22"
Installation depth   74.3 mm / 2.93"
     
Recommended enclosure    
Vented box    
Net volume   7 L
Port diameter ø 50 mm
Port area   20 cm²
Port length   34 cm (angled port)
Port tuning frequency Fb 45 Hz
Lower limiting frequency (-3dB)   43 Hz
Recommended DSP settings   Recommended "self-define" highpass filter with 45 Hz cut-off frequency and Q = 1.2;
additional EQ filter 80 Hz / Q = 1.0 / +1.0 dB

Scope of delivery

1 x Subwoofer HELIX IK W6-DVC2
1 x Grille
1 x Gasket
1 x Data sheet

Knowledge Base
Visit Knowledge Base
Product questions?
To the form
Distributors
Find a distributor