« Overview previous Product 3 / 3 next

HELIX DSP.2

Digital 8-channel signal processor with 48 kHz / 24 Bit signal path

HELIX DSP.2

The new sound generation – HELIX DSP.2

Design-wise precious and compact as before, the Helix DSP.2 unveils its new "technical heart" with state-of-the-art technology. The cutting-edge 64 Bit “fixed point” Audio DSP with a breathtaking processing power of 295 MHz and 1.2 billion MAC operations per second provides unparalleled sound optimization options, not solely in this price range.

The connectivity options leave nothing to be desired – six RCA/Cinch and six highlevel inputs with ADEP circuit (Advanced Diagnostics Error Protection), an optical SPDIF input and eight RCA/Cinch outputs with max. 6 Volts output voltage enable most flexible car audio configurations. But there's even more than that – the HELIX Extension Card slot (HEC) allows to add further interfaces like a Bluetooth® Audio Streaming module or a High Resolution Audio USB soundcard.

Despite its increased feature set, the configuration of the HELIX DSP.2 is easier and more versatile than ever before thanks to the completely revised DSP PC-Tool V4 software.

  • Extremely powerful “fixed point” Audio DSP with 64 Bit resolution and 1.2 billion MAC operationsper second
  • HELIX Extension Card slot (HEC) for additional input / output modules like Bluetooth® Audio Streaming, High Resolution Audio Streaming via USB etc.
  • Smart highlevel input with ADEP circuit (Advanced Diagnostics Error Protection)
  • Start-Stop capability down to 6V supply voltage
  • Freely definable signal routing with separate matrices for line, SPDIF and HEC/AUX
  • Time alignment with up to 20 ms delay time per channel, additionally reverse time alignment for in-phase summation of the inputs
  • Optimized signal path and power supply for further improved sound quality
  • “Ground lift” switch to avoid ground loops
  • Control input for connecting remote controls and accessories
  • Inputs: 6 x RCA/Cinch, 6 x Highlevel and 1 x optical SPDIF
  • Outputs: 8 x RCA/Cinch with max. 6 Volts output voltage
  • Easy configuration thanks to the professional and user-friendly DSP PC-Tool Version 4 software

 
 
Note: The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Audiotec Fischer GmbH is under license. Other trademarks and trade names are those of their respective owners.

Smart highlevel input
The latest generation of OE car radios incorporates sophisticated possibilities of diagnosing the connected speakers. If a common signal processor will be hooked up failure messages and loss of specific features (e.g. fader function) quite often appears - but not with the DSP.2.
The new ADEP circuit (Advanced Diagnostics Error Protection) avoids all these problems without loading the speaker outputs of the OE radio during high volumes unnecessarily.

Power Save Mode
The Power Save Mode is incorporated in the basic setup. It allows to significantly reduce the power consumption of the amplifiers that are connected to the HELIX DSP.2 once there’s no input signal present for more than 60 seconds. Please note that in many up-to-date cars with “CAN” or any other internal bus structures it may happen that the radio remains “invisibly” turned on for up to 45 min. even after locking and leaving the car! Once the “Power Save Mode“ is active the remote output and therefore the connected amplifiers will be turned off. The HELIX DSP.2 will reactivate the remote output within a second if a music signal is applied. It is possible to either modify the turn-off time of 60 sec. or completely deactivate the “Power Save Mode” via the
DSP PC-Tool software.


Start-Stop capability
The switched power supply of the HELIX DSP.2 assures a constant internal supply voltage even if the battery’s voltage drops to 6 Volts during engine crank.


Automatic Digital Signal Detection
Switching from analog input to the digital input is done automatically as soon as a signal is detected on the Optical Input. This feature can be deactivated in the DSP PC-Tool software. Alternatively you can use an optional remote control for manual switching between analog and digital inputs.

Inputs

6 x RCA/Cinch
6 x Highlevel speaker input
1 x Optical SPDIF (12 - 96 kHz)
1 x Remote In

Input sensitivity RCA / Cinch 2 - 4 Volts
Highlevel 3.5 - 11 Volts
Outputs 8 x RCA/Cinch
1 x Remote Out (max.500 mA)
Output voltage 6 Volts
Frequency response 10 Hz - 22,000 Hz
DSP resolution 64 Bit
DSP power 295 MHz (1.2 billion MAC operations/second)
DSP type Audio signal processor
Signal converters A/D: BurrBrown
D/A: BurrBrown

Signal-to-noise ratio - digital input

Signal-to-noise ratio - analog input

112 dB (A-weighted)

107 dB (A-weighted)

Total harmonic distortion (THD+N) digital input

Total harmonic distortion (THD+N) analog input

< 0.0008 %

< 0.002 %

IM distortion (IMD) - digital input

IM distortion (IMD) - analog input

< 0.003 %

< 0.005 %

Crosstalk

> 90 dB

Operating voltage 9.6 - 18 Volts (max. 5 sec. down to 6 Volts)
Current draw < 480 mA
Additional features HEC slot, Ground lift switch, Control Input, ADEP circuit, Auto Remote switch
Dimensions (H x W x D) 40 x 177 x 120 mm / 1.58 x 6.97 x 4.72“

1 x HELIX DSP.2

1 x USB cable

1 x Mounting material

1 x Instruction manual

DIRECTORDIRECTOR

DIRECTOR

Remote Control with Touchscreen

EPC 5.2EPC 5.2

EPC 5.2

"Easy Plug Cable 5.2" - 5.00 m cable harness for an easy connection of HELIX and MATCH products to factory car radios.

URC.3URC.3

URC.3

Universal remote control for BRAX, HELIX and MATCH DSP products

HEC AUX INHEC AUX IN

HEC AUX IN

AUX input module for HELIX devices

HEC BTHEC BT

HEC BT

Bluetooth® input module with Qualcomm® aptX™ codec support for HELIX devices

HEC OPTICAL INHEC OPTICAL IN

HEC OPTICAL IN

Optical input module for HELIX devices

HEC HD-AUDIO USB-INTERFACEHEC HD-AUDIO USB-INTERFACE

HEC HD-AUDIO USB-INTERFACE

High Resolution Audio USB input module for HELIX devices

loading... HELIX DSP.2 HELIX DSP.2 HELIX DSP.2 HELIX DSP.2 HELIX DSP.2 HELIX DSP.2 HELIX DSP.2 HELIX DSP.2 HELIX DSP.2 HELIX DSP.2 HELIX DSP.2 HELIX DSP.2